NICOR’s rugged and durable LED hazardous location fixtures provide years of reliable, maintenance-free operation in environments where flammable vapors or combustible dusts are present. Our linear, flood, and area lights deliver uniform light distribution greater than 126 lumens per watt and have a CRI of 70+ in two CCTs, 4000K and 5000K.
Eres - XPR
The Eres Hazardous Location LED Area Light is designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambient temperature can be expected. For use in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC, Eres fixtures are available in 45W and 65W in class C1D2. The Eres is ideal for retrofit of existing HPS/MH and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
Multi-Mount (shown with ceiling mount attachment)
Pendant Mount
Specifications
- Certifications: UL 844 & CSA22.2; Class I Division 2 Group A, B, C, D; Class II Division I Group E, F, G; Class II Division 2 Group F and G; Class III; UL1598A Marine
- Housing: Copper-free, die-cast aluminum
- CCT: 4000K, 5000K
- Input Voltage: 100-240/277 VAC
- Surge Protection: Philips SP1 10kA surge protector
- Operating temperature: -40° to 131°F (-40°C to 55°C)
- Installation: Easy installation with seven available mounting options:
Ceiling, Wall/Mounting (25° or 90°), Stanchion Mount (25° or 90°), Adjustable Bracket, Pendant - Access Ports: Four at 3/4” NPT (only available on ceiling and wall mount attachments)
- Finish: Gray polyester powder coat
- FCC: Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
Downloads
Proteus - XPL
The Proteus Hazardous Location LED Luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, Proteus fixtures are available in class C1D2 in 40W with a two foot length or in 80W with a four foot length. Proteus Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
Specifications
- Certifications: UL 844 & CSA22.2; Class I Division 2 Group A, B, C, D; UL1598A Marine (Salt Water), Wet Location; UL8750LED Safety; IECEx Ex nR II C T6 Gc; CSA C22.2 No. 137-M1981
- Housing: Copper-free, die-cast aluminum
- CCT: 4000K, 5000K
- Input Voltage: 100-240/277 VAC
- Surge Protection: Philips SP1 10kA surge protector
- Operating temperature: -40° to 122°F (-40°C to 50°C)
- Installation: Easy installation with three mounting options: Ceiling, Wall/Stanchion, and Hanging Chain. Included mounting bracket is drilled for legacy bolt patterns
- Access Ports: Two at 3/4” NPT
- Finish: Gray polyester powder coat
- FCC: Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
Downloads
Titan - XPQ
The Titan LED Luminaire is designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambient temperature can be expected. For use in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC and IEC, Titan fixtures are available in 80W, 100W, and 150W in both C1D1 and C1D2 classes. The Titan is ideal for retrofit of existing HPS/MH and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
Specifications
- Certifications: UL 844 & CSA22.2; Class I Division 1 Group C, D; Class I Division 2 Group A, B, C, D; Class II Division 2 Group F, G; Class III; UL1598A Marine; IECEx Ex d IIB T6 Gb/ Ex tb IIIC T85°C Db
- Housing: Copper-free, die-cast aluminum
- CCT: 4000K, 5000K
- Input Voltage: 100-240/277 VAC
- Surge Protection: Philips SP1 10kA surge protector
- Operating temperature: -40° to 140°F (-40°C to 60°C)
- Installation: Easy installation with three available mounting options: Ceiling, Wall, and Floor
- Access Ports: Two at 3/4” NPT
- Finish: Gray polyester powder coat
- FCC: Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
Downloads
