DLE

Edge Lit Recessed LED Downlight

DLE

Edge Lit Recessed LED Downlight

Ultra-Slim CCT Selection

Now part of the NICOR Select line, the DLE Edge Lit Recessed LED Downlight Series offers a clean appearance coupled with simple, housing free installation. Eliminating the need for a J-box or recessed housing, the DLE fixture uses a plenum-rated cable connector to link the downlight module to the remote driver box and then pops into place with its spring-loaded retention tabs for a secure fit. The ultra-thin fixture depth and off-board driver allow for a more flexible installation and increased lifetime with improved thermal management. With a micro-switch on the driver housing, the DLE Select offers the ability to adjust the CCT to 3000K, 4000K, or 5000K. Simplify your installations using a single fixture that can be adjusted on the fly with NICOR Select.

DLE_Select2
DLE-Slsh2
DLE-Slsh5
DLE-Slsh3
DLE-Slsh4

DLRv5

Recessed LED Downlight

DLRv5

Recessed LED Downlight

DLR_Select_splash2

Select the Driverless AC System

Now part of the NICOR Select line, the DLR Select from NICOR is a 4” or 5” & 6” recessed LED downlight that is ideal for new construction using the patented new construction frame or as a retrofit into most 4” or 5” & 6” housings. Improved to meet the newest certification standards, the DLR Select is over 60 LPW, 90+ CRI and R9 greater than 50. With a micro-switch on the driver cap, the DLR Select offers the ability to adjust the CCT to 3000K, 4000K, or 5000K. The DLRv5 system of the downlight combined with the frame provides the lowest overall system cost for energy efficient, high quality lighting.

DLRv5-SplashSpec1
DLRv5-SplashSpec2
DLRv5-SplashSpec3

DSK

Driverless Surface Mount LED Downlight

DSK

Driverless Surface Mount LED Downlight

Affordable CCT Selection with a Slim Profile

Now part of the NICOR Select line, the DSK Driverless Surface Mount LED Downlight is the thinnest installation solution that also offers the ability to adjust the CCT to 3000K, 4000K or 5000K. The ultra slim, driverless technology allows this fixture to fasten to most any 4” pancake, non-metallic or 4/O junction box eliminating the need for recessed housing. Simplify your installations using a single fixture that can be adjusted on the fly with NICOR Select.

DLE_Select1
DSK-Slsh2
DSK-Slsh5
DSK-Slsh4
DSK-Slsh1

LSC

LED Linear Strip

LSC

LED Linear Strip

LSCS_splash

Versatile Solution

The LSC Select LED Linear Strip adds on to our tried-and-true linear strip with selectable CCT and light output options. Delivering optimal performance and long life in a slim design that’s ideal for general ambient lighting in retail, warehouse, residential utility, and light commercial or industrial applications. This versatile fixture is easy to surface mount on both ceilings and walls and can accommodate end-to-end runs. The LSC features a semi-circular, milky-white lens that offers a more polished aesthetic while eliminating hotspots, and is an economical, energy-efficient lighting alternative to single lamp fluorescent strips and some wraparound fixtures. For even greater energy savings, an optional microwave occupancy sensor is also available.

LSCSelect1
LSCSelect2
LSCSelect3
LSCSelect4

NUC5

Under Cabinet Series

NUC5

Under Cabinet Series

Enhanced Ambiance and Efficiency

NICOR LED under cabinet lighting is an attractive upgrade that can quickly increase the value and functionality of your workspace. The NUC5 now offers a CCT Selectable design which allows for easy adjustment to 2700K, 3000K, or 4000K. The NUC5 presents a clean, professional look allowing you to use an existing wall switch or dimmer to easily control your lights. Offering uniform illumination, warm color and low operating temperatures, this under cabinet light can be used in residential, retail, and commercial applications. Whether in a kitchen, under a shelf or in a defined work space, these 1-inch low profile fixtures are perfect for task or accent lighting and illuminating products, apparel or collectibles.

NUCv5_splash
NUCv5_1
NUCv5_2
NUCv5_3

TAC

Architectural LED Troffer

TAC

Architectural LED Troffer

tac_select_LS

Smart & Simple

The TAC Architectural LED Troffer is an economical lighting solution for commercial, educational, medical, and retail applications where general-purpose ambient lighting is required. With its contemporary center lens design, TAC provides a soft natural glow and even illumination that minimizes glare. The CCT Selectable design allows for easy adjustment to 3500K, 4000K, or 5000K. Available in 1x4, 2x2, or 2x4 configurations, the TAC is an easy-to-install upgrade from linear fluorescent lighting to a long-lasting, energy-efficient LED solution.

TACSelect1
TACSelect2
TACSelect3

TAR

Architectural LED Troffer Retrofit Kit

TAR

Architectural LED Troffer Retrofit Kit

Industry-Leading Installation Time

The TAR Architectural LED Troffer Retrofit provides an economical, easy-to-install upgrade from linear fluorescent lighting to a long-lasting and energy-efficient LED solution. The contemporary center lens design delivers a soft natural glow with even illumination and minimized glare, making it an attractive general-purpose ambient lighting solution. The TAR also features a premounted driver with a high-efficiency, maintenance-free LED chamber. Whether in a school, hospital, airport, office or convenience store, NICOR LED troffers bring a stylish and economical lighting solution to all commercial, educational, medical, and retail applications. The CCT Selectable design allows for easy adjustment to 3500K, 4000K, or 5000K.

TARS_splash
TARSelect1
TARSelect3
TARSelect2

TPC

Edgelit LED Panel

TPC

Edgelit LED Panel

tpc_select_splash

Low Profile and Low Cost Solution

The ultra slim, TPC Select Edgelit Panel provides uniform edge-to-edge illumination for a modern, clean aesthetic that eliminates shadowing. It installs easily into tight ceiling spaces, making it an ideal replacement for traditional fluorescent fixtures, and includes built-in T-Grid clips for a more secure installation and added safety. The CCT Selectable design allows for easy adjustment to 3500, 4000, or 5000k. The TPC is available in 1x4, 2x2 and 2x4 configurations and has optional accessories for surface mount or recessed flange mount applications as well as emergency battery backup.

TPCSelect1
TPCSelect3
TPCSelect4
TPCSelect2