6″ REMODEL SLOPED CEILING HOUSING

This 6″ Non-IC rated sloped housing is suitable for new construction in residential and commercial applications and requires 3” spacing from insulation. Integral thermal guards protect against improper lamping and misuse of insulation materials with lamp wattage ratings and apertures based off trim selection. Designed for slope ceiling installation with a 2/12 to 6/12 pitch, the socket pivots to allow the lamp to be aimed straight down regardless of ceiling pitch. The airtight housing limits the exchange of air between ceiling plenum and heated/cooled areas. The housing adjusts from ½” to 1½” to accommodate ceiling thickness and its 7½” height allows it to be used in 2” x 8” joist construction.

 

Specifications

  • Suitable for remodel in residential or commercial applications
  • Line voltage
  • Listed for through branch circuit wiring and includes several ¾" knockouts
  • Supplied with three push in wire connectors
  • Four pryouts with integral strain relief simplify Romex installation
  • Housing is secured to plaster frame with screws and can be removed for access to junction box
  • Heavy-gauge hanger bars provide greater stability, allowing housing to be positioned at any point within a 24" joist span
  • Airtight housing limits the exchange of air between ceiling plenum and heated/cooled areas
  • Washington State Energy Code approved to meet restricted airflow requirements

 

Part Number:

17020R

Downloads

– Spec Sheet