10W Emergency Inverter Pack
The EMID is a 10 watt, 120V output LED emergency inverter-style driver for field installation that enables normal and emergency operation of switched or non-switched LED installations of the DSE8 and DSK56 luminaires. During a power failure, the EMID activates emergency mode to maintain a constant p…
The EMID is a 10 watt, 120V output LED emergency inverter-style driver for field installation that enables normal and emergency operation of switched or non-switched LED installations of the DSE8 and DSK56 luminaires. During a power failure, the EMID activates emergency mode to maintain a constant power level to the fixture without light degradation for a 90 minute duration. The EMID is a fully enclosed unit with a test switch and indicator light, as well as integrated mounting features.
- Cast aluminum housing with galvanized steel backplate
- Constant power design provides 100% lumen output on fixtures up to 20 watts for >90 minutes
- Installs on most 4” junction boxes
- For use with switched or unswitched fixtures
- Long life Li-Ion battery
Color Options:
Ordering information
Downloads
Specifications
-
WattageInput: 1.4W, Output: 10W
Listings & certifications
- cETLus Intertek Listed
- UL 924 (Emergency Lighting)
- Damp-Location
- FCC Class B
Features
Construction
- Cast aluminum housing with galvanized steel backplate
- On-board test switch and indicator light
- White powder coat finish
Electrical
- Constant power design provides 100% lumen output on fixtures up to 20 watts for >90 minutes
- 120VAC 60Hz input voltage
- Long life Li-Ion battery
- 24-hour recharge time
Installations
- Installs on most 4” junction boxes
- For use with switched or unswitched fixtures
- Rated for damp location
- Rated for installation only with compatible NICOR fixtures (see list below)
Full Listings
- ETL Listed to UL924 for damp locations
- Meets FCC Part 15, Subpart B, Class B standards for conducted and radiated emissions
Warranty
- 5-year limited system warranty standard
