VT5 Series Selectable LED Vaportite
The VT5 LED Linear Vaportite is designed to give long lasting, energy efficient light in demanding locations. The VT5 is provided with CCT and lumen output selectable options with the choice of 3500K, 4000K, or 5000K CCTs and low, medium, and high lumen output. It is also DLC 6.0 premium certified, …
The VT5 LED Linear Vaportite is designed to give long lasting, energy efficient light in demanding locations. The VT5 is provided with CCT and lumen output selectable options with the choice of 3500K, 4000K, or 5000K CCTs and low, medium, and high lumen output. It is also DLC 6.0 premium certified, ensuring top of the line quality and performance. This IP66 rated fixture is dust and watertight and replaces legacy fluorescent strip lights in car wash operations, garages, maintenance facilities, canopies, locker rooms and stairwells.
- Selectable wattage and color temperature options for application flexibility
- Meets DLC 6.0 Premium with improved efficacy rated at over 145Lm/W
- IP66 fully gasketed housing provides dust and water-tight protection
- Polycarbonate housing and lens available in 2Ft, 4Ft, and 8Ft linear lengths
- Supports 0-10V dim-to-off with optional sensor controls
- Available with factory installed emergency battery backup
Color Options:
Light GrayOrdering information
Downloads
Specifications
-
Lifespan>50,000
Listings & certifications
- UL Certified
- DLC 6.0 Premium
- IP66 Ingress Protection
- RoHS Compliant
- FCC Class A
- Wet-Location (ETL 1598)
- IP66 Rated (IP65 only when using external sensor)
- Designed to withstand up to 2.5kV ring wave per ANSI C82.77-5-2017 requirements
- Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
- LM-79 and LM-80 testing performed in accordance with IESNA standards
Features
Construction
- Fully gasketed polycarbonate housing
- Captive stainless steel latches ensure a water tight seal
- Fully sealed light chamber keeps LEDs sealed during installation
Optical System
- UV-stabilized, frosted polycarbonate lens
- Wrapped lens provides 5% uplight
- 80+ CRI for optimal light output quality
Electrical
- Input voltage of 120-277VAC
- Wattage selector switch and CCT selector switch on driver and in body
- Continuous dimming with dim-to-off via 0-10VDC controls
- Optional, factory installed, 4W, 8W and 18W EM packs available
- Power factor > 0.95
- THD < 7%
- Luminaire surge protection level: designed to withstand up to 2.5kV ring wave per ANSI C82.77-5-2017 requirements for Indoor Hard-wired and Indoor Portable Luminaires
Installations
- Toolless surface mount installation via spring-steel clips
- Clips contain mounting feature for cable/chain suspension
- Can be surface mounted to walls and ceilings for application variability
- Drill through knockouts available: 3 on back, 1 opposite end of sensor socket
- Operating temperature range of -40°F to 113°F (-40°C to 45°C) when surface mounted
- Operating temperature range of -40°F to 122°F (-40°C to 50°C) when suspended at least 18” from ceiling
- For installations where power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel
Full Listings
- cETLus 1598 Listed for wet locations
- DLC 6.0 Premium compliant
- IP66 Rated (IP65 only when using external sensor)
- RoHS Compliant
- Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
- TM-21 Reported L70(9k) life >50,000 hours
- LM-79, LM-80 testing performed in accordance with IESNA standards
Warranty
- 5-year limited system warranty standard
- Warranty does not cover product failure due to an over-voltage event (power surge)
