6 in. Sloped Recessed Housing for Remodel Applications, IC Rated
This 6″ IC rated housing is suitable for remodel in residential and commercial applications and for direct contact with insulation. Integral thermal guards protect against improper lamping and misuse of insulation materials with lamp wattage ratings and apertures based off trim selection. Designed f…
This 6″ IC rated housing is suitable for remodel in residential and commercial applications and for direct contact with insulation. Integral thermal guards protect against improper lamping and misuse of insulation materials with lamp wattage ratings and apertures based off trim selection. Designed for slope ceiling installation with a 2/12 to 6/12 pitch, the socket pivots to allow the lamp to be aimed straight down regardless of ceiling pitch. The airtight housing limits the exchange of air between ceiling plenum and heated/cooled areas. The housing adjusts from 0.5” to 1.5” to accommodate ceiling thickness and its 8¾” height allows it to be used in 2” x 8” joist construction.
- Designed for sloped ceiling remodel applications with compatibility for ceiling pitches from 2/12 to 6/12
- Pivoting socket allows the lamp to aim straight down regardless of ceiling angle for consistent illumination
- IC-rated airtight housing is approved for direct contact with insulation and helps improve overall energy efficiency
- Integrated thermal protection helps guard against overheating, improper lamping, and insulation misuse for enhanced safety
- Adjustable housing accommodates ceiling thicknesses from 0.5 inch to 1.5 inches and features an 8.75-inch height suitable for standard 2-inch x 8-inch joist construction
Color Options:
Ordering information
Downloads
Specifications
-
Wattage150
Listings & certifications
- cULus Listed
- IC-Rated
- Airtight (ASTM E283)
- UL Feed-Through
- Damp-Location
Features
Construction
- Aluminum construction provides greater heat dissipation
- Suitable for remodel in residential and commercial applications
- Designed for slope ceiling installation for ceilings with pitch between 2/12 and 6/12
- Adjustable socket bracket assures downward lamp positioning regardless of pitch angle
- IC rated. Suitable for direct contact with insulation
- 8.75” height allows use in 2” x 8” joist construction
Electrical
- Integral thermal protector guards against improper lamping and misuse of insulation materials
- Supplied with three push-in wire connectors
Full Listings
- Washington State Energy Code approved to meet restricted airflow requirements
- Airtight housing limits the exchange of air between ceiling plenum and heated/cooled areas
- Listed for through branch circuit wiring and includes several 0.75” knockouts
- UL Listed for direct contact with insulation
- UL Feed-Through
- UL Listed
- CUL Listed
