70+

The LED Emergency Outdoor Full Cutoff combines 90-minute emergency lighting with a low-profile, architectural design. The EOF is designed for outdoor use, with an optional cold-weather kit for added reliability in northern climates. The EOF comes standard with a photocell and wall switch, allowing users added energy efficiency and the ability to control the light from a switch, with an optional motion sensor adding even more energy efficiency. A non-emergency unit is available for locations not requiring battery-backup, providing a uniform look for all fixtures.

Delivering maximum lumen output in an attractive and streamlined design, the OUS LED Specification Canopy utilizes advanced LED technology to provide enhanced, even illumination with less energy. The OUS is an effective under canopy lighting solution for exterior ceilings or for parking garages, car ports, covered walkways, or other commercial spaces. Its die-cast aluminum housing with hinged and removable back box and convenient knockouts allow for easy J-Box, surface mount, or pendant installations. The fixture is equipped with an integrated heat sink, a Type V distribution precision lens, and has an optional photocell.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.

The XPQ Series (Titan) LED Luminaire is designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambient temperature can be expected. For use in locations made hazardous by the presence of flammable vapors, gases, or combustible dusts as defined by the NEC and IEC. XPQ Titan fixtures are available in 80W, 100W, and 150W packages. The XPQ is ideal for retrofit of existing HPS/MH and offers higher efficacy for increased energy savings, lower maintenance costs and shorter pay backs.

The OSA4 LED Adjustable Sconce features next-generation design with Selectable CCT/Wattage models. With efficiencies up to 138 lumens per watt, the OSA provides optimal light in a compact, adjustable design. Using a separable hinged backplate, the OSA is easy to install on walls or directly to a J-Box, and is adjustable from 0 to 90-degrees. An internal switch offers the ability to adjust the Wattage to low, medium, or high setting and to select the CCT (3000K/4000K/5000K). It is an economical and efficient replacement for a traditional wall pack and is ideal for accent or general purpose exterior lighting.

The OUC4 LED Canopy offers high performance in an economical and practical design. The OUC4 achieves even light distribution using a prismatic, frosted lens that is UV- and fire-resistant while its die-cast aluminum housing has convenient knockouts for easy J-Box, surface mount, or pendant installations. The OUC4 is an efficient outdoor canopy lighting solution for exterior ceilings or for parking garages, carports, covered walkways, or other commercial spaces, and is equipped with an integrated heat sink and a Type V distribution precision lens. The OUC4 offers two models with selectable wattages (75W/60W/45W), (120W/96W/72W) and selectable CCT (3000K/4000K/5000K). Factory mounted photocell standard.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D1 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.

The XPL Series (Proteus) Hazardous Location LED luminaire is designed for installations where moisture, dirt, corrosion and vibration may be present. For use in locations made hazardous by the presence of flammable vapors or gases as defined by the NEC, XPL fixtures are available in class C1D2 in 40W with a two-foot length or in 80W with a four-foot length. The XPL (Proteus) Series is ideal for retrofit of existing HPS/MH & FL and offers higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.