1001 - 2000

The LED Emergency Outdoor Full Cutoff combines 90-minute emergency lighting with a low-profile, architectural design. The EOF is designed for outdoor use, with an optional cold-weather kit for added reliability in northern climates. The EOF comes standard with a photocell and wall switch, allowing users added energy efficiency and the ability to control the light from a switch, with an optional motion sensor adding even more energy efficiency. A non-emergency unit is available for locations not requiring battery-backup, providing a uniform look for all fixtures.

The OWR4 LED Wallpack combines a simple rectangular style with top performance and efficiency. The OWR4 features a single-piece, die-cast aluminum housing with a ribbed, UV and fire-resistant lens for even light distribution. It installs easily into a 4/O J-Box. The OWR4 is recommended for perimeter lighting as well as building entrances, garages, tunnels, other commercial spaces where general purpose lighting is desired. The OWR4 offers selectable wattages (High/Med/Low) and selectable CCT (3000K/4000K/5000K). Factory mounted photocell standard.

The OSA4 LED Adjustable Sconce features next-generation design with Selectable CCT/Wattage models. With efficiencies up to 138 lumens per watt, the OSA provides optimal light in a compact, adjustable design. Using a separable hinged backplate, the OSA is easy to install on walls or directly to a J-Box, and is adjustable from 0 to 90-degrees. An internal switch offers the ability to adjust the Wattage to low, medium, or high setting and to select the CCT (3000K/4000K/5000K). It is an economical and efficient replacement for a traditional wall pack and is ideal for accent or general purpose exterior lighting.

The LED Emergency Outdoor Full Cutoff combines 90-minute emergency lighting with a low-profile, architectural design. The EOF is designed for outdoor use, with an optional cold-weather kit for added reliability in northern climates. The EOF comes standard with a photocell and wall switch, allowing users added energy efficiency and the ability to control the light from a switch, with an optional motion sensor adding even more energy efficiency. A non-emergency unit is available for locations not requiring battery-backup, providing a uniform look for all fixtures.

The new LSC2 Select LED Linear Strip adds on to our tried-and-true linear strip with selectable CCT and light output options. This versatile fixture is easy to surface mount on both ceilings and walls and can accommodate continuous runs. The LSC2 features a semicircular, milky-white lens that offers a more polished aesthetic while eliminating hotspots, and is an economical, energy-efficient lighting alternative to single lamp fluorescent strips and some wraparound fixtures. For even greater energy savings, an optional microwave occupancy sensor is also available. The LSC2 delivers optimal performance and long life in a slim design that’s ideal for general ambient lighting in retail, warehouse, residential utility, and light commercial or industrial applications.

The OSA4 LED Adjustable Sconce features next-generation design with Selectable CCT/Wattage models. With efficiencies up to 138 lumens per watt, the OSA provides optimal light in a compact, adjustable design. Using a separable hinged backplate, the OSA is easy to install on walls or directly to a J-Box, and is adjustable from 0 to 90-degrees. An internal switch offers the ability to adjust the Wattage to low, medium, or high setting and to select the CCT (3000K/4000K/5000K). It is an economical and efficient replacement for a traditional wall pack and is ideal for accent or general purpose exterior lighting.

The DLRv6 is the newest generation of NICOR retrofit downlight, now in Single CCT and Selectable CCT models. The DLRv6 from NICOR is a 4” or 5”/6” recessed LED downlight that is ideal for new construction using standard housings or the patented new construction frame, or as a retrofit into most 4”, 5”, or 6” housings. Improved to meet the newest certification standards, the DLR series is over 80Lm/W, 90+ CRI, and R9 greater than 50. The DLR Single CCT is available in 3000K. With a micro-switch on the driver cap, the DLR Select offers the ability to adjust the CCT to 2700K, 3000K, 3500K, 4000K, or 5000K. The DLRv6 system of the downlight combined with the frame provides the lowest overall system cost for energy efficient, high quality lighting.

The DSE Edge Lit LED Surface Mount Series offers a slimline profile downlight in both round and square apertures. The edge-lit technology uses a reflective light guide panel that disperses light through a diffused lens, making it a practical and economical solution with high performance. The driverless design allows the DSE to snap mount into most 4” junction boxes with no concern for plenum depth. Available in a variety of diameters, the DSE brings a clean aesthetic and excellent performance to any area of the home.

The OWR4 LED Wallpack combines a simple rectangular style with top performance and efficiency. The OWR4 features a single-piece, die-cast aluminum housing with a ribbed, UV and fire-resistant lens for even light distribution. It installs easily into a 4/O J-Box. The OWR4 is recommended for perimeter lighting as well as building entrances, garages, tunnels, other commercial spaces where general purpose lighting is desired. The OWR4 offers selectable wattages (High/Med/Low) and selectable CCT (3000K/4000K/5000K). Factory mounted photocell standard.

The OWR4 LED Wallpack combines a simple rectangular style with top performance and efficiency. The OWR4 features a single-piece, die-cast aluminum housing with a ribbed, UV and fire-resistant lens for even light distribution. It installs easily into a 4/O J-Box. The OWR4 is recommended for perimeter lighting as well as building entrances, garages, tunnels, other commercial spaces where general purpose lighting is desired. The OWR4 offers selectable wattages (High/Med/Low) and selectable CCT (3000K/4000K/5000K). Factory mounted photocell standard.

This wall sconce features a contemporary brushed nickel finish with a 10” white alabaster swirled glass. This striking combination of metal and glass adds elegance to any room.

The RSDS-M Surface Mount Downlight with PIR Motion Sensor is a sleek and efficient lighting solution that offers effortless automatic on/off control. With the convenience of selecting your preferred CCT (2700K/3000K/3500K/4000K/5000K) at the flip of a switch, this light adapts to your lighting needs with ease. Time control of the motion sensor provides another level of customization. The RSDS-M is ideal for providing uniform illumination and automatic controls in closets, pantries, and other similar spaces.